One of the most common questions that we here at MadJack get asked is “just what can I do to best prepare my floor for its new concrete coating?” While most floors do not need to be prepared it is best to know what small steps you can take to get your floor ready for us to come out and install a brand new polyurea coating.
Generally speaking, when you are getting your new floor ready for a polyurea concrete coating there are 2 things that you can do to get it ready. First, make sure everything that is big is moved off your floor in time for the coating to be applied. Second, run a dehumidifier in the room where the coating will be placed and close the windows.
Here at MadJack concrete coatings, we pride ourselves on providing the industry’s best polyurea coating for the greater Knoxville, Tennessee area. If you are on the fence about if one of these concrete coatings is the right choice for you then I highly suggest you reach out to us by clicking here and we will give you an honest opinion if one of our coatings are the right choice for your project.
Make Sure Everything Is Moved off the Floor Prior to Installation
It might seem obvious but one of the most important things you can do to any floor before installing a polyurea concrete coating is to first remove all objects from the floor itself. Many people forget about this crucial step in the process and end up having to move heavy items such as toolboxes, cars, sheds, and even furniture before the installation process can start.
When it comes to installing a polyurea coating on a floor in Knoxville, Tennessee, it is essential to move all items off the surface beforehand. Polyurea coatings are popular for their durability and resistance to abrasions, impact, and chemicals. They are often used in industrial and commercial settings, such as factories, warehouses, and automotive shops. However, to ensure that the coating adheres properly and lasts for a long time, it is crucial to prepare the surface properly before installation.
One of the most critical steps in preparing a floor for a polyurea coating is to clear it of all objects, including equipment, tools, debris, and furniture. Any items left on the surface can interfere with the coating’s ability to bond with the floor, leading to adhesion issues, bubbling, or peeling. Moreover, the coating may not level properly, resulting in unevenness and an unattractive appearance. By removing all items from the floor, you ensure that the polyurea coating can reach every corner and crevice, creating a seamless and robust protective layer. Additionally, it is essential to ensure that the floor is clean and free of any contaminants, such as dust, grease, or oil, which can also affect the coating’s adhesion.
This is why one of the most important things you can do to prepare your floor for a brand-new polyurea concrete coating is to remove all objects off the floor itself. Always start with larger objects as these take longer to move and free up the most space. Smaller items can be moved at the last second but don’t leave to many of them or it will take forever to get your floor ready for the polyurea coating.
Run a Dehumidifier to Ensure the Room Is Ready for the Polyurea Coating
This might surprise you but one of the best things you can do to prepare your floor for its new polyurea concrete coating is to run a dehumidifier in the room. Naturally, this step only works in enclosed areas as outside concrete will have to have its polyurea coating installed without a dehumidifier.
Having a dry room drastically helps the total installation process for a polyurea coating.
Running a dehumidifier prior to installing a polyurea concrete coating is crucial for several reasons. Firstly, polyurea coatings are moisture-sensitive and require a dry surface to bond correctly. Any moisture present on the surface can cause the coating to fail, resulting in delamination, blistering, or other adhesion issues. A dehumidifier can help reduce the moisture levels in the air and on the surface, ensuring that the polyurea coating adheres correctly and lasts for a long time.
Secondly, high humidity levels can also affect the curing process of the polyurea coating. Excess moisture in the air can slow down the curing time, resulting in a weaker and less durable coating. By running a dehumidifier before and during the installation process, you can create an ideal environment for the coating to cure properly, ensuring maximum durability and longevity.
Finally, using a dehumidifier can also help improve the overall air quality in the installation area, making it a safer and more comfortable environment for workers. High humidity levels can lead to mold and mildew growth, which can cause health problems for workers and damage the coating’s adhesion. By controlling the humidity levels with a dehumidifier, you can create a cleaner, safer, and more efficient work environment.
Overall, running a dehumidifier will help the polyurea coating adhere to the concrete faster and shorten the window of opportunity where something could damage the new coating before it fully cures. This is why we always recommend that somebody run a dehumidifier before we get out there to install a new polyurea coating.
